Experimenting with Plein Air Easels and Sketchboards

I'm not entirely sure what to call these things: plein air easels, sketchboards, drawing boards? 

Whatever the right term is, I'm on the hunt for a minimal, easy-to-deploy setup for sketching and painting outdoors. The important restriction is that everything has to fit in my red art bag alongside all my other tools. So I've got three prototypes to test on my next trip.

Option one is a simple drawing board I cut down to fit the bag. I've added a quarter-inch T-nut so it can mount on a tripod, which gives it a bit more stability to the bag. It's just a flat sheet of plywood, 33 by 24.5 cm (about 13" x 9¾"). Nothing fancy, but solid.

Option two I'm calling a sketchbook holder. It's a prototype cut from matte board, 34 by 16.5 cm (roughly 13½" x 6½"). The clever bit is a slot cut into it where your sketchbook spine slots in. The back cover sits behind the board while the pages open out in front, held firmly in place with a couple of bulldog clips. The exposed board at the top gives you space for your sketching and painting media. There are plenty of DIY versions of this out there and I've been particularly inspired by Sarah Burn's design experiments. Commercial versions like those in the Etcher series are also worth a look. For my prototype, I'm using Velcro, though a lot of people prefer magnets.

Option three is a watercolour sketchboard, a bit bigger so it can handle larger sheets like an Arches block or similar pads. It's square at 29 cm (11"), mostly because I had a square piece of matte board handy. It loosely follows Doug's Sketching School design. The extra space means there are two configuration options: one end suits a bigger layout with a full size palette and room for a water container, while the other works better for larger pads but has less room for a palette and no space for water.

All three are light and fit neatly in the bag, so I'll take them all out and put each through its paces. With some creative use of clips, they can all handle pretty much the same tasks. Tripod mounting and a water bowl are the exception for now, but maybe I'll sort that out later.

Alvin Crashes My Instagram

Me: Alvin what are you doing in my instagram posts? Alvin: Lila made me do it!

A post shared by Norm Hanson (@oz_endless_summer) on Jun 4, 2017 at 10:14pm PDT

I'm not sure what bought hin out but yesterday Alvin insinuated himself into my Endless Summer Instagram photostream. Well he has a point I'm doing a daily drawing project for a month and he is hand drawn, after all.

A drawing board for my tablet

One goal I had set myself on the last endess summer trip was to create more art directly onto my tablet. I had updated to corel painter 2017 and downloaded few free apps to test, including wacom’s Bamboo Paper, Well they do work but trying to use the tablet outside with just my finger, a stylus or the HP pen proved very difficult. So difficult I gave up.

The first problem was glare, which made the LCD screen almost impossible to see. Any direct sunlight on the screen meant all I could see was the mirror reflection of a very frustrated me. picking up the tablet and tilting it away from the sun worked but it soon got heavy and difficult to hold in one hand as I sketched with the other. Normally when I paint I rest a drawing board on my knee or easel.The tablet proved a little slippery for that or trying to rest on a book of box. It was fine flat on the table but …. I just couldn’t see what I was drawing. Tilting the kickstand up into the normal typing position was better but it was not a good angle for sketching freedom.The draw board idea stayed with me. I got an old board and cut some notches in it to exactly match the width of the ick stand and then I turn turned the kickstand right up so the table “hung” on the drawing board. I could rest the drawing board on my knee and the whole configuration was looking move stable, till I split and push up a little and the table slid off the notches and slipped around again.

 

It was quite literally back to the drawing board.

I had the brilliant idea of adding a small plastic clip to hold the kickstand from slipping off. Firstly I glued it on but that was no where near strong enough, and soon the tablet broke free and slide off my lap and onto the floor (phew no damage done). So it was both glued and riveted next. I also put a couple of furniture felt wear pad at the position the base of the tablet sat on the drawing board. Magic the whole thing is very stable now.

Time to try it out in a variety of ways.

As a way to keep the tablet steady on my lap or propped against a table, it was perfect. Next I tried to see if it was a way to have a small sketch book open on the drawing board and using the tablet for the reference. It seemed a little cramped at first but it proved wonderful to have the sketch and reference in close proximity. Then I got bold and attached my “portable” wacom bamboo tablet with the pressure sensitive pen underneath the HP screen but paper clipped to the board, except for the usb connector cable hanging down this is a real winner, especially with the touch controls so I don’t need my mouse, I’m sure I will get very productive with this set up. Finally  I tried out just straight photo editing, on my lap (eg while on the couch watching TV). Again pretty comfortable, no extra hands required and no slippy/sliddy tablet behaviour.

 

  

Sketching Kit Four :: Making a new drawing board

While I was in Tassy I found the blue folio containing my art gear was a bit awkward to always carry around. weight wise it was fine it just always required being held in one hand (eg I had o put it down to take a photo etc) and it was a little on the largish side anyway. So I started leaving it behind and only sketching with what was in my camera bag (which was probably fine). But leaving my better art gear unused seemed a waste, and while passing the Kathmandu Shop in Salamanca place I decide to ask what they had as a temporary backpack to carry the artgear. After being shown a few expensive unsuitables I was eventually shown the 15L pocket pack (it rolls up into it own little pocket, and is designed to take up little room or weight in your luggage but provide a suitable “day” pack if required) It looked sturdy enough and was about the right size and price, I immediately transferred all my gear, including my Derwent Inktense pencils & blocks (a new favourite). Well, except no drawing board or individual sheets of watercolour paper, which where too large to fit. Happy ending, I carried my art gear everywhere after that.

I really like the idea of a backpack, so I resolved to make a slightly smaller drawing board to fit in the pack. It was simple to make from particle board. The shape is a little tapered and rounded at the top so it is easy to slide into the pack. Unfortunately this means half sheets are too big and I will have to settle for quarter sheets of watercolour paper! The board is ample sized for A4 sheets or an A4 sketch book held down with clips or a couple of rubber bands. I have also painted one side white and the other a darker gray. I have also been recently experimenting with notan/tonal value cards, so I figured I’d add a simple 5 step gray scale tone checker. Getting the tonnes reasonably accurate with acrylic paint was a bit harder than I expected (since acrylic paints notoriously dry darker than it looks when first mixed) so a bit of trial and error was required. The greyscale is conveniently always at the on the top or right hand side of my drawing board, so it will be easy hold the board out and check tones. The final embellishment was to drill a small hole as a colour checker. By positioning the hole over an area of colour it is isolated from the surrounding colours, and tones, and easy to compare with your work on the drawing board.

I’m not certain who much use I’ll get out of these tone and colour checking tools, but they look neat and they will always be easy to access and ready to use